Nafasi ya Mwanzo: | China |
Brand Name: | Mawimbi ya juu |
Model Idadi: | TPW-LPT200-827-160-41M |
vyeti: | ISO9001, ROHS, CE |
The dummy load of the high-frequency transmitting circuit is mainly to allow the frequency, the impedance should be matched, and it can withstand the transmitted power. It can usually be used to test the power of long-wave, medium-wave and short-wave broadcast transmitters. Simply put, it is a radio frequency 50 ohm resistor that can withstand high power, and the standing wave coefficient is very small. It is used to test the transmitter, instead of the real load. The special equipment converts all the radio frequency energy input into it into heat and dissipates it. For the transmitter to Say, the dummy load provides a perfect 50 ohm impedance.
The TPW-LPT200-827-160-41M RF load (also known as a terminal or dummy load) has a 4.3-10 male connector. This Topwave 200 watt 4.3-10 male load/terminal is rated for a maximum frequency of 2700MHz. Our 4.3-10 male terminated loads are RF load terminations with 50 ohm impedance. At the same time, its PIM value is -160dBc.
Model No | TPW-LPT200-827-160-41M |
Mara kwa mara(MHz) | 790-2700MHz |
VSWR | ≤1.25 |
PIM(dBc) | -160dBc@2x43dBm |
Ukadiriaji wa Nguvu (W) | 200W (wastani wa nguvu kwa kila bandari) |
Impedans | 50 ohm |
Connector | 4.3-10 Mwanaume |
rangi | Iliyowekwa nyeusi |
Muda wa Uendeshaji (℃) | -25°C hadi + 50°C |
Vipimo (mm) | Tazama Mchoro wa mitambo |
Uzingatiaji wa ROHS & CE
PIM Iliyohakikishwa Imehakikishwa -160dBc
Upana wa Bendi ya Kufunika 790-2700MHz
Hasara ya Chini ya Kuingiza & VSWR ya Chini
Inapatikana kwa Viunganishi vya Aina ya N, 7/16DIN au 4.3/10
Inatumika sana kwa Suluhu za Antena Iliyosambazwa(DAS).
Imewekwa Vizuri katika Mfumo wa Ujenzi wa Ndani (IBS)